Latest jobs

Job description:

Job Purpose Job holder is responsible for the execution of the Health and Industrial Hygiene programs including the Industrial

hygiene Risk Assessment at the offshore sites.

Industrial hygiene (IH) surveys consist of ‘non-exhaustive list: Noise monitoring and mapping, air quality measurement, chemical measurement, manage Chemwatch system, benzene and other volatile organic compounds exposure.

Contribute to the development of the Occupational Health and Industrial Hygiene Services

Being proactive and showing initiative to improve practice

Follow up on important industry changes regarding monitoring and controlling of industrial hygiene risks

Key Accountabilities

Perform IH risk assessment on chemical, physical and biological workplace hazards and follow up on action

plans [offshore and onshore]

Develop Industrial Hygiene Risk Assessment Files as a result of the risk assessment activities

Liaise with operational sites to check and review air quality data monitoring

Act as an administrator for the Chemical Database software and cascade training

Measure noise and organise vibration surveys on offshore production platforms and provide technical

support to HSE superintendents

Support and advise company Radiation Protection Officers and the Environment department on ionising

radiation and radioactivity health matters

Develop and update company procedures to complete the Health and Industrial Hygiene CMS

Assist in the selection and calibration of IH equipment

Assist in the development and implementation of the Health and Industrial Hygiene awareness campaigns

Participate in carrying out Health and IH inspections and audits

Actively search for new industry best practice regarding monitoring and controlling industrial hygiene risks

Participate in the trainings set up by the department to grow the job applicant’s skills and knowledge in IH

Key Accountabilities Key Accountabilities Competencies Delegate Appropriately and Communicate Effectively Demonstrate Adaptability in Managing Complex Situations Demonstrate Learning Agility and Drive Innovation Develop Emotional Intelligence and Cultural Competence Develop Others and Institutionalise Knowledge Develop Talent for the Future NOC Sustainability Facilitate Collaboration and Sense of Community Improve Safety, Technical Proficiency and Results Lead By Example with NOC Values Set Purpose, Strategic Direction and Company Plan Strengthen Accountability and Continuous Improvement Think and Act in Stakeholder-Centric Ways Education

Bachelor’s degree in chemistry, environment, engineering or health science

Good knowledge of chemistry, biology, physics and mathematics

Certification Experience

Fresh graduates (internships, academic projects, or exposure to GHG/energy efficiency topics preferred).

Role:PepsiCo, a global leader in beverages and convenient foods, is seeking a dedicated LD&T Assistant Driver in Saudi Arabia. This role involves safeguarding stock and ensuring accurate inventory management to support various functions such as Planning, Production, and Sales. Candidates should possess at least two years of experience in supply chain roles, ideally within the FMCG sector, and have strong analytical and communication skills.

Role:A critical role exists for a Firefighter Driver Operator in Kuwait, focusing on emergency response and medical support. This position demands expertise in fire safety, emergency medical care, and effective communication, ensuring readiness for various emergency situations. Responsibilities include operating fire department vehicles, maintaining equipment, and providing immediate care to the critically ill and injured.

Role:Driver

Job Id :100198001

BrowseCareers

×

Please enter details to report job

Name*

Email*

Reason to report

Description

URGENTLY REQUIRED – RESTAURANT DRIVERS

We are hiring immediately!

🛵 2 Motorcycle-/Scooter Drivers

🚗 2 Car Drivers

✅ Attractive Salary

✅ Immediate Joining

📞 Call Now: Mr. Gran – 94036837

BrowseReference

Discover more

JOB

Browse Careers

Buy Maps

Basic Details

Location : Fahaheel , Kuwait

BuyMaps

Qualification

Posted : 20 days ago

Job Type : Full-Time

Company : Kuwait Jobs

Contact Info

Mobile : +965 94036837

Alternate Mobile : Not-Mentioned

Email : Not-Mentioned

Role:We’re Hiring: Sales Lead

📍 Location: JLT, Dubai, UAE

🏢 Company: ISA Bullion (ISA Commodities FZCO)

ISA Bullion is looking for a commercially driven Sales Lead to accelerate business growth, acquire new clients, and expand our presence in the physical precious metals market.

We are seeking a proactive sales professional with a strong track record in business development, lead conversion, and relationship building. The ideal candidate will take ownership of the entire sales cycle, from prospecting and pitching to account funding and the first trade.

Responsibilities

New Business & Closing

Own the full sales cycle: first contact, pitch, objection handling, account funding, first trade.

Convert marketing leads quickly. First contact within the same working day.

Close high-value and corporate accounts personally.

Hit monthly targets for new funded accounts and new AUM.

Lead Generation (Own Pipeline)

Build an independent pipeline on top of marketing leads.

Prospect HNIs, business owners, traders, and professionals through LinkedIn, networking and referrals.

Target CFD and margin traders who want physical, allocated gold.

Source leads from business councils, chambers, community groups and industry events.

Target corporates for staff gold-saving and corporate gifting.

Business Building & Partnerships

Identify and sign introducers: wealth advisors, accountants, jewellers, money exchanges, real estate brokers.

Build relationships with community leaders and business associations.

Spot new segments and channels, test them, and scale what works.

Represent ISA Bullion at networking events, expos and industry forums.

Field & Inside Sales

Minimum 5–6 external face-to-face meetings per week.

Mix of field visits (clients, corporates, partners) and inside sales (calls, WhatsApp, video demos).

Run product demos showing live BID/ASK, vaulting and instant buyback.

Follow a structured follow-up rhythm so no warm lead goes cold.

Problem Solving & Market Feedback

Solve client blockers end to end: KYC issues, funding questions, product doubts.

Spot recurring objections and lost-deal reasons. Bring solutions, not just problems.

Share market and competitor insights with marketing and management.

Suggest improvements to the pitch, offers, sales materials and onboarding flow.

Collaboration with Marketing & Retention

Give marketing weekly feedback on lead quality by source.

Hand over funded clients to retention with full context.

Support BTL activations and client events with on-ground selling.

Admin & CRM

Keep HubSpot updated: log every lead, call, meeting and deal stage.

Conduct weekly pipeline reviews and monthly forecasts.

KPIs

New funded accounts per month.

New AUM brought in.

Self-sourced leads vs marketing leads (share of pipeline).

Lead-to-funded conversion rate.

External meetings per week (minimum 5–6).

New introducer partners signed and active.

Average time from lead to first trade.

Pipeline value and forecast accuracy.

If you thrive in a target-driven environment and are ready to build new business opportunities in the precious metals sector, we would love to hear from you.

Qualifications

Minimum 5 years of experience in B2C sales, relationship management, or business development.

Proven sales experience in bullion, precious metals, wealth management, banking, insurance, or investment products.

Salary Range : 7-10K AED

Currently based in the UAE, preferably holding a valid UAE residence visa.

Strong English communication skills; fluency in Hindi is an advantage.

Demonstrated ability to meet or exceed monthly sales targets and convert leads into funded accounts.

Experience in lead generation, client acquisition, pipeline management, and closing high-value sales.

Willingness to conduct a minimum of 5–6 external face-to-face client meetings per week.

Availability to participate in two weekend days per month for events, exhibitions, and promotional activities.

A valid UAE driving licence is an advantage.

Ability to build relationships with high-net-worth individuals, corporate clients, and introducer partners.

Strong negotiation, networking, problem-solving, and client relationship management skills.

Proficiency in CRM systems, preferably HubSpot, with accurate sales reporting and pipeline forecasting.

Notice period of 30 days or less is preferred.

Role:Who we are

Elia Grid International (EGI) is a global power systems consultancy supporting the transformation of electricity systems worldwide. Built on the expertise of leading European transmission system operators—Elia (Belgium) and 50Hertz (Germany)—EGI delivers high-level technical and strategic advisory services to power utilities, regulators, and energy stakeholders.

With offices in Belgium, Germany, the UAE, Saudi Arabia, Malaysia, and Canada, you will join an international, collaborative, and fast-growing environment, where learning and impact go hand in hand.

In Saudi Arabia, EGI contributes to projects that support Vision 2030, including renewable energy integration, grid expansion, system reliability, and advanced transmission solutions.

Your role

As a Junior Power System Engineer, you will be part of experienced project teams and progressively take responsibility on real-life power system studies. You will learn how transmission systems are planned, analysed, and optimised to support the energy transition.

Typical Activities Include (with Training And Support)

Supporting the development of power system consultancy services in kSA

Performing Data collection

Building, updating, and validating power system models

Contributing to studies related to renewable energy and battery storage integration

Performing power system simulations (load flow, short circuit, hosting capacity, transient stability,..etc.)

Preparing clear and structured technical reports and presentations

Gradually participating in client interactions and proposal preparation alongside senior experts

Your responsibilities will evolve based on your skills, interests, and development path, with close guidance from experienced power system specialists.

Your profile

We are looking for motivated graduates or junior engineers who are eager to learn and grow:

Master’s degree in Electrical Engineering, Energy Engineering, or similar

0–3 years of experience (freshly graduates are welcome to apply)

Basic knowledge of power systems and transmission networks

First exposure to power system tools such as PowerFactory or PSS®E is a plus

Curious, proactive, and willing to develop technical and consulting skills

Comfortable working in a team and in an international environment

Good communication skills in English (Arabic is a strong asset)

What we offer

Permanent contract with a competitive salary package

Structured on-the-job training, mentoring, and technical coaching

Exposure to international projects and cutting-edge energy challenges

A clear career development path in a fast-growing consultancy

A collaborative and inclusive work culture where young talent is supported and valued

Diversity & inclusion

At EGI, we believe diverse teams drive better solutions. We are committed to fostering an inclusive workplace where everyone has equal opportunities to learn, grow, and succeed—regardless of gender, background, or nationality.

Why join EGI?

At EGI, You Will

Work on projects that directly contribute to Saudi Vision 2030

Develop strong technical skills in power system planning

Gain exposure to international experts and global projects

Build a solid and sustainable career in the energy sector

You will not only build strong technical expertise, but also develop a consulting mindset that combines engineering excellence with real-world impact.

Location

Riyadh Mobility: around 10% worldwide, depending on project needs

Want to know more about us?

We let your future colleagues do the talking

Check our website and our LinkedIn page for last news and updates.

Role:Driver

Driver

Job Id :100198037

BrowseCareers

×

Please enter details to report job

Name*

Email*

Reason to report

Description

DRIVER REQUIRED – KUWAIT 🇰🇼

🚗 We Are Hiring a Driver!

Are you looking for a driving job in Kuwait? Contact us directly!

📞 Direct Contact Number: 51448415

📱 WhatsApp Number: 99099388

✅ Interested candidates are welcome to contact us directly.

📩 Please call or send a WhatsApp message for more details.

BrowseCareers

Discover more

Find Recruiters

Benchmark Pay

Search Jobs

Basic Details

salary : 200 KWD

Qualification : HSC

Posted : 20 days ago

Job Type : Full-Time

BrowseCareers

Company : Kuwait Jobs

Posted By: Naimur Rahman

Contact Info

Mobile : Not-Mentioned

Alternate Mobile : Not-Mentioned

Email : Not-Mentioned

Role:About Us

Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.

Job Purpose

Provide technical leadership and subject matter expertise for all mechanical engineering activities associated with mining, beneficiation, pelletizing, material handling, and utility systems. Lead the design, optimization, reliability improvement, troubleshooting, and lifecycle management of mechanical assets to ensure safe, reliable, and cost-effective plant operation.

The Principal Mechanical Engineer serves as the senior technical authority for mechanical systems and supports operational excellence, plant expansions, debottlenecking initiatives, and capital projects.

Key Responsibilities

Technical Leadership

Act as the lead mechanical engineering authority for mining and pelletizing facilities.

Develop and review engineering standards, specifications, and best practices.

Provide technical guidance to project teams, maintenance teams, and junior engineers.

Support engineering governance, risk assessments, and technical audits.

Plant Reliability & Asset Integrity

Drive reliability-centered maintenance (RCM) initiatives.

Lead root cause failure analysis (RCFA) for critical equipment failures.

Develop long-term asset management strategies.

Monitor equipment performance indicators and recommend improvement actions.

Ensure compliance with asset integrity and reliability standards.

Engineering Design & Projects

Lead FEED, detailed engineering reviews, and project execution support.

Review mechanical calculations, equipment sizing, vendor documents, and design packages.

Support plant expansion, brownfield modifications, and debottlenecking projects.

Evaluate emerging technologies and recommend practical implementation strategies.

Required Qualifications

Education

Bachelor's Degree in Mechanical Engineering.

Professional Engineer (PE), Chartered Engineer (CEng), or equivalent certification preferred.

Experience

Minimum 15–20 years of mechanical engineering experience.

At least 10 years in mining, mineral processing, iron ore beneficiation, pelletizing, steel, or heavy industrial facilities.

Proven experience supporting large-scale mining and pellet plant operations.

Experience in EPC, EPCM, brownfield, and operational environments.

Moving forward together

We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.

And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.

And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Role:Driver

Job Id :100198071

BrowseCareers

×

Please enter details to report job

Name*

Email*

Reason to report

Description

Casual Dining Restaurant Requires

Drivers

English speaking

5-6 years experience in the restaurant industry.

10 hours a day.

6 days a week.

30 day vacation a year.

Include

Accommodation and transportation.

send cv to Email: hospitality.rec@gmail.com

ReserveTables

Discover more

job

jobs

Browse Careers

Basic Details

Location : Messila , Kuwait

BuyMaps

Qualification

Posted : 19 days ago

Job Type : Full-Time

Company : Kuwait Jobs

Contact Info

Mobile : Not-Mentioned

Alternate Mobile : Not-Mentioned

Email : hospitality.rec@gmail.com

Key Accountabilities:

Fleet IT Support:

Provide e-mail and phone advice to vessels on all problems concerning onboard computer systems, hardware and software, analyzing specific problems and suggesting corrective actions.

Provide solutions to Fleet and SHEQ divisions as per IMO and class of registry’s rules and regulations to meet charterers demand.

Monitor fleet applications and relevant servers for seamless data transmission to and from the vessel and office.

Provide technical support and liaise with service providers for radio communication equipment onboard.

Provide technical support to vessels audio, video and entertainment system.

Configure Interface among vessels IT network and engine vibrations systems as required by business requirements to obtain vessels best performance.

Coordinate with the vendor support to resolve technical problems with desktop computing equipment, printers and software.

Support the testing, configuration, purchase, supply and installation of replacement on board computer hardware and software to ensure safe and efficient vessel operation.

Test single units of any third-party software destined for vessels to ensure successful integration into the existing on-board software prior to fleet-wide procurement.

Ensure all vessels computers maintain current version of anti-virus software and supply upgrades of anti-virus software. Also, ensure all vessels computers are running licensed software and that there are no copyright infringements.

Ensure the repairs are completed efficiently and cost-effectively taking into account the severity of the fault and the vessel’s voyage pattern when repairs are requiring a visit to the vessel.

Prepare and present weekly update to the Fleet IT Team Lead regarding all relevant Fleet IT Tasks.

Ensure network connectivity inside vessels, that includes activating network points, and patch panels. Also, wireless connectivity of all provided SSIDs.

Assist in administering the software program that links between data files from vessels and the office-based data processing programs. Advice vessels on any data errors and suggest corrective actions

Technology Enhancement

Perform all activities related to Asset’s management such as registration, tagging, preventive maintenance, licenses and usage.

Obtain various recommended patches for operating systems, databases, Softwares and apply them to all the systems on timely basis to ensure optimum performance.

Safety, Health, Environment, & Quality (SHEQ):

Adhere to all relevant SHEQ policies, procedures, instructions and controls so that NAKILAT provides a safe, world class, secure and environmentally responsible service to customers, the public and its own people.

Policies, Systems, Processes & Procedures:

Implement approved policies, processes and procedures, and provide instructions to subordinates to ensure their proper implementation.

Qualifications:

Bachelor’s degree in Computer Science, Computer Engineering or any related field

Microsoft Certified Professional (MCP) certificate is a must

ITIL certificate is a must

Cisco Certified Network Associate (CCNA) certificate is preferred

Experience:

5 years of experience of which a minimum of 3 years should be in a similar position, preferably in a similar industry

Job Specific Skills:

Knowledge of Windows, MAC, Linux, Microsoft products and different antivirus software

Knowledge of marine radio, navigation & satellite communication system, marine navigation & cargo engineering system

Basic project management skills (follow-up, documentation, updating tasks)

Role:TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration – and we want you to be part of it. You’ll be joining a culture that values curiosity, expertise, and ideas as well as equal opportunities, inclusion, and authenticity. Bring your unique energy to our team of more than 21,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go.

Job Purpose

Provides technically complex engineering solutions in particularly challenging project environments in accordance with TechnipFMC standards, procedures and processes, with a continuous concern for quality, targets, and customer satisfaction.

Job Description

Performs and approves engineering solutions within projects and/or operations within projects, and manufacturing, fabrication & installation sites, in accordance with department, project, manufacturing, fabrication & installation instructions, schedules & processes and HSE requirements:

Technically correct engineering analysis

Optimized engineering solutions

Technical assistance within projects, manufacturing, fabrication, and installation sites.

Support engineering activities for new projects from concept through design, qualification, manufacturing, testing, and product delivery.Support complex problem-solving situations.

Perform or coordinate engineering calculations, design reviews, tolerance assessments, FEA/CFD, material selection, and other technical analyses as applicable.

Participates in discussions with clients to understand their needs, manage expectations, troubleshoot and produce technical solutions to meet project requirements.

Prepares, plans and participates in System Integration Testing (SITs).

Supports Field Installations and Issues. Prepare game plan to resolve field issues.

Support product improvement and product standardization and product qualification projects.

Coordinates engineering activities on tenders and project execution.

Approves design basis.

May supervise sub-contractors.

Supports the knowledge development within the discipline by providing guidance, trainings and mentoring to engineers

Guarantees the compliance of engineering solutions with client requirements, industry standards, and Group HSE, engineering processes, and best practices for the discipline.

Provides guidance and training to Engineers under supervision-coordination.

Interfaces with other engineering disciplines and engineering team(s).

Work safely and follow safety policies.

You Are Meant For This Job If

BS degree in Engineering preferred or equivalent with 5 to 10 years’ experience in the field

Minimum 4 years' experience in the Oil and Gas Industry as an Engineer (Design Engineer/WH and XT Engineer/System Engineer/Project Engineer), or minimum 3 years' experience in FMC as LOF Engineer, working with Surface equipment

Independently performs assignments to achieve stated objective. Determines and develops approach to solutions

Receives technical guidance only on unusual or complex problems or issues

Actively contribute to the HSE environment.

Performs advanced level professional work

Identifies key barriers/core problems and applies problem-solving skills in order to deal creatively with complex situations. Troubleshoots and resolves complex problems

Deep knowledge of surface wellhead drilling and completion equipment and/or Pressure control systems and / or Production systems

Deep knowledge and understanding of offshore/onshore operations specifically related to surface wellhead equipment

Experienced in use of industry standards and guidelines including ISO 13628, ISO10423, API 6A, API 17D and others main applicable standards (NORSOK, ASME, IECEx)

Good knowledge and understanding of design, manufacturing, repair, remanufacturing and refurbishment processes.

Ability to perform high level engineering calculations in accordance with applicable engineering design guidelines.

Experienced in relevant engineering and project management tools: CAD (Unigraphics/NX/Microstation), Mathcad, TCE, SAP and MS office.

Advanced technical skills in engineering

Excellent command of English

Skills

HSE - Health, Safety and Environment

Resolve Complex Problems

Design

CAD

Being a global leader in the energy industry requires an inclusive and diverse environment. TechnipFMC promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture.

TechnipFMC respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain.

Role:Imagine working at the forefront of innovation in fluid-flow technology, with over 1400 colleagues across the globe, and contributing to a legacy of excellence that spans eight manufacturing facilities on four continents. Armstrong Fluid Technology is more than just a leader in our industry; we are a community of the brightest and most creative minds, driven by a shared mission to engineer the future and safeguard our planet.

As a member of our team, you'll dive into an environment that encourages learning and boundary-pushing every day. You'll be part of an agile and dynamic workplace where today's solutions are built for tomorrow's challenges.

The Applications Engineer plays a pivotal role in supporting customers and the sales team by providing technically sound, value-added solutions centered around the company’s product offerings. This is a collaborative, team-based role that requires strong communication, engineering acumen, and problem-solving capabilities. The position supports pre-sales activities, offers technical consultancy, and contributes to strategic initiatives and product development.

Based in Saudi Arabia-Riyadh , the role will support business activities across Saudi Arabia, Egypt, and possibly extend to the wider Middle East region.

Key Responsibilities

Take ownership of resolving technical customer issues and provide consultative support.

Collaborate with consulting engineers, contractors, and internal teams to offer tailored solutions.

Contribute to cross-departmental project teams and strategic initiatives.

Maintain technical documentation and support the continuous development of selection software.

Triage early-stage enquiries to assess opportunities.

Participate in customer visits and technical presentations.

Track and maintain customer and competitor data to support agile business responses.

Gather and report customer feedback to drive service improvements.

Collaborate with marketing to align on campaigns and initiatives.

Contribute to special projects as required.

Collect data and insights for reporting to senior leadership.

Ensure consistent documentation and communication across the team.

Support the development of internal procedures and best practices.

What We’re Looking For

To thrive in this role, you should bring:

Bachelor's degree in Mechanical Engineering or a related engineering discipline from a recognised university

Saudi Council of Engineers (SCE) registration or eligibility, as applicable

Previous work experience in engineering/manufacturing within an industrial environment.

Experience in the Saudi Arabia or GCC HVAC/pumping market.

Strong understanding of HVAC systems and the ability to interpret technical specifications and schematics.

Familiarity with Saudi Building Code and relevant international HVAC standards

Proficiency in pump selection software (preferably Armstrong or similar other pump manufacturer tools).

Knowledge of District Energy or Data Centre projects (preferred).

Valid driving licence, recognised in Saudi Arabia

High proficiency in Microsoft Office applications.

Strong analytical and problem-solving skills; capable of root cause analysis.

Effective communicator with a collaborative mindset.

Self-motivated, action-oriented, and capable of working independently or in teams.

Comfortable working in a global matrix structure.

Willing to travel across Saudi arabia/Egypt when required.

Professional Competencies

HVAC system knowledge - Review schematics, equipment layouts, pump room arrangements, and engineering drawings.

Develop and modify engineering drawings using AutoCAD, NanoCAD, or equivalent CAD software

Work closely with sales teams, consultants, contractors, and customers to address technical challenges and provide appropriate engineering solutions.

Provide technical application support, review project specifications, equipment schedules, hydraulic requirements, and engineering drawings to develop technically compliant pump selections.

Willingness to travel across Saudi Arabia and other GCC countries, including Egypt, as business requirements demand.

Excellent communication, presentation, and interpersonal skills.

Strong articulation skills, with the ability to communicate complex engineering concepts and demonstrate product differentiation effectively.

Support consultant specification development and promote Armstrong solutions as a preferred

Participate in technical meetings, project reviews, site visits, and customer discussions to understand project challenges and recommend appropriate solutions.

Strong analytical, troubleshooting, and problem-solving skills, with the ability to perform root cause analysis.

Additional Preferred Experience What We’re Looking For

Previous involvement in consultant engagement, specification development, design-assist activities, and value engineering for HVAC projects.

Experience working with international HVAC manufacturers, pump manufacturers, or engineering solution providers.

Why Armstrong Fluid Technology?

By joining us, you’ll become part of a global community dedicated to pushing the boundaries of fluid-flow technology. You’ll have endless opportunities to learn, grow, and make a significant impact on the world. Together, we'll build tomorrow’s solutions today.

Role:Client Introduction

In this role, you will collaborate closely with one of our esteemed clients—a globally recognized leader in their industry, distinguished by their commitment to excellence, innovation, and delivering exceptional value. As a trusted IT consulting partner, Dautom is supporting their strategic initiatives by connecting them with exceptional talent to drive business growth and transformation.

Job Role: Senior Civil Engineer

Work Location: Onsite Dubai

Notice Period: Immediate – 30 Days

JOB PURPOSE:

The Civil Engineer at our real estate company is responsible for planning, designing, and overseeing various construction and infrastructure projects and overseeing facilities management. The role involves managing all aspects of civil engineering, including site development, structural design, and ensuring compliance with regulatory standards. The Civil Engineer collaborates with architects, contractors, and other stakeholders to ensure the successful execution of projects.

JOB RESPONSIBILITIES:

Project Planning:

Develop comprehensive project plans, considering factors such as site conditions, environmental impact, and regulatory requirements.

Design and Drafting:

Create detailed designs, specifications, and drawings for site development, foundations, and structural elements using CAD software.

Budgeting and Cost Estimation:

Prepare project budgets, cost estimates, and material requirements, ensuring effective resource allocation.

Permitting and Compliance:

Ensure projects comply with local regulations and obtain necessary permits and approvals.

Site Inspection:

Conduct regular site inspections to monitor progress, quality, and compliance with design specifications.

Contract Management:

Collaborate with contractors and suppliers, overseeing the bidding process, and managing contracts to ensure adherence to project timelines and budget.

Quality Control:

Implement and maintain quality control procedures to ensure construction activities meet industry standards and project specifications.

Risk Management:

Identify potential risks related to construction projects and develop mitigation strategies.

Client Interaction:

Communicate with clients to understand their requirements, provide project updates, and address any concerns.

Documentation:

Maintain accurate records, project documentation, and reports, including 'as-built' drawings and technical documentation.

QUALIFICATIONS:

Bachelor's degree in Civil Engineering or a related field.

Professional Engineer (PE) license is a plus.

Proven experience in civil engineering, preferably within the real estate or construction industry.

Proficiency in AutoCAD and other relevant engineering software.

PREFERRED SKILLS:

Strong knowledge of construction codes, regulations, and best practices.

Excellent project management and communication skills.

About Dautom

Dautom is a globally recognized IT consulting and technology services organization committed to enabling digital transformation through innovation, expertise, and a people-centric approach.

We partner with leading organizations across industries to accelerate business growth by delivering exceptional talent, strategic IT consulting services, and innovative technology solutions. With a strong global presence and deep industry expertise, Dautom empowers businesses to enhance operational excellence, embrace digital evolution, and achieve sustainable success.